![Floor props overview]()
Floor prop Eurex top
Floor prop with impact protector
- durable, due to impact protector
- easy-to-turn adjusting nut, thanks to special thread geometry
- less physical effort needed because the prop is lightweight
- operational safety achieved by consistently high load capacity of at least 20 and/or 30 kN in accordance with EN 1065 – Class C/D and C/E
- height adjustment made easy by hole-numbering
Floor prop Eurex 20 eco
High load capacity and safe handling
- permitted load capacity up to 36.7 kN
- quick and easy height adjustment thanks to numbered and engraved pegging holes
- optimised thread pitch allows for quick and safe release even under high loads
- low weight results in speedy work that conserves energy
- safe working conditions thanks to handtrap-prevention and anti-drop-out latch
- long lifespan due to high-quality galvanisation and forged adjusting nut
Floor prop XN
The floor prop for special requirements in residential construction
- highly economical, thanks to application-optimised design
- 15 kN load capacity in trials to US Standards (ANSI)
Floor prop Eurex 60
The super-strong aluminium floor prop
- sturdy floor prop with a load capacity of 60 kN up to 5.50 m height (and, with reduced load capacity, even up to 11.00 m)
- handy plumbing strut for high wall formwork (extension range to over 13.00 m)
Floor prop Eurex 20 LW
The lightweight on the construction site
Light, durable and ergonomic – due to the use of high-strength steels, the floor prop weighs 20% less than conventional props made of unalloyed structural steel. All this with the usual performance and durability.
Floor prop Eurex top
Floor prop with impact protector
![Floor prop Eurex top]()
Technical specifications:
Certificate: Z-8.311-905
Eurex 20 top
Load capacity: min. 20 kN at any extension length up to 36.7 kN depending on extension length
Standard: EN 1065 class C/DEurex 30 top
Load capacity: min. 30 kN at any extension length up to 41.2 kN depending on extension length
Standard: EN 1065 Class C/E- Durable
due to impact protector - Easy-to-turn adjusting nut
thanks to special thread geometry - Less physical effort
because of low weight - Operational safety
achieved by consistently high load capacity of at least 20 or 30 kN in accordance with EN 1065 – Class C/D or C/E as well as handtrap-prevention and anti-drop-out latch - Height adjustment made easy
with permanently numbered holes
Download table permissible load capacity Eurex(A) Hole numbering
(B) Ergonomic fastening clamp
(C) Forged adjusting nut
(D) hot-dip galvanized inside and out
(E) Impact protectorFloor prop Eurex 20 eco
The economical floor prop for working quickly and safely
![Floor prop Eurex 20 eco]()
Technical specifications:
Certificate: Z-8.311-942
Load capacity: min. 20 kN at any extension length up to 36.7 kN depending on extension length
Standard: EN 1065 class B/D- Permissible 20 kN load capacity
with fully extended length - Quick and easy height adjustment
thanks to numbered and engraved pegging holes - Quick and safe way to release
even under high loads thanks to optimised thread pitch - Rapid working while conserving energy
because of low weight - Safe working conditions
supported by handtrap-prevention and anti-drop-out latch - Long life span
resulting from high-quality hot-dip galvanising and forged adjusting nut
Download table permissible load capacity Eurex(A) Hole numbering
(B) Ergonomic fastening clamp
(C) Forged adjusting nut
(D) hot-dip galvanized inside and outFloor prop Eurex 20 LW
The lightweight on the construction site
![Detail view floo rprop Eurex 20 LW]()
Technical specifications:
Load capacity: min. 20 kN at any extension length
Standard: EN 1065- Exceptionally high ergonomics
because of 20% weight saving compared to conventional EN 1065 class B/D props - Long-term durability
through innovative material technology and high manufacturing quality - Greatest possible safety
due to end-to-end quality assurance and certified load-bearing capacity - High application safety
with handtrap-prevention and anti-drop-out latch - Optimally energy-saving, low-wear release of the adjusting nut
because of special thread geometry - Quick and easy height adjustment
with permanent numbering of the pegging holes
(A) Hole numbering
(B) Ergonomic fastening clamp
(C) Forged adjusting nut
(D) Hot-dip galvanized inside and outFloor prop Eurex 100 plus
The lightweight aluminium floor prop with high load capacity
![Floor props Eurex 100 plus]()
Download table permissible load capacity Eurex 100 plus- Wide range of applications with up to 128 kN load capacity and extension lengths from 1.70 to 5.50 m
- Easy handling and low dead weight thanks to consistent aluminium design
- Easy to strip because of the jack nut's large thread pitch
- Easy to detach even under high load thanks to double thread
- Reduced cleaning effort with self-cleaning thread
- Expanded range of application with easy-to-mount extra screwjack mechanisms
![self-cleaning double thread and jack nut]()
Fast length adjustment and easy to strip out even under high load thanks to sel-cleaning double thread and jack nut.
![permanently stamped length marking on outer tube]()
The prop length is easily measured-up with permanently stamped langth marking on outer tube.
References
Reformed Practice Primary School "Ferenc Kölcsey", Debrecen
Governador Eraldo Gueiros industrial harbour complex
