Load-bearing tower d3
The high-performing and especially cost-effective shoring system for a wide range of applications
- thanks to lightweight components
- easy to assemble with fewer separate components
- rapidly set up by assembling in either the horizontal or the upright
- no tools needed for assembly
- simplified repositioning process thanks to variety of options
easily adapted to wide range of shoring tasks because
- the inter-frame spacing can be adapted to the load capacity
- precisely adapted to any length, width and height
- easily combined with all Doka Floor Systems
- high load capacity up to 94 kN per leg, due to the increased material strength of the d3 frame
- great flexibility makes for adaptability to project-specific requirements
- high-level stability with its 1.52 m wide frame
- hot-dip galvanized steel parts ensure a long lifespan
References
System
d3 frame
- hot-dip galvanized steel frames available in 0.90 m, 1.20 m, and 1.80 m height for simple height adaptation
- the built-in stop-ring of the d3 coupler prevents slippage into frame
- safety catches for fast and safe diagonal cross assembly
![Load-bearing tower d3]()
![Load-bearing tower d3]()
Diagonal crosses
- simple and fast assembly with permanently connected diagonal braces
- different lengths permit flexible inter-frame spacing for cost-optimising the load capacity
- clear identification of lengths through coloured clips and imprint
- available for inter-frame spacing of 60 cm, 100 cm, 150 cm, 175 cm, 200 cm, 250 cm and 300 cm for any frame height
Screw jack head and foot
- height adjustment exact to the millimetre
- practice-oriented spindle nut with option for connecting anti-liftout guard
- released with minimal physical effort, even when under load
- different screw-jack heads and feet for different options for use
![Load-bearing tower d3]()
![Load-bearing tower d3]()
Heavy-duty screw jack
- flexibly adapted to different heights
- screw-jack extension length up to 2 m per load-bearing tower permits optimum adaptation to changes in the level of the support base, to downstand beams and to sloping floors
Utilisation
Fast and safe assembly
- logical and easy assembly sequence
- assembly on the flat for maximum speed and safety
- simple and fast assembly and repositioning by crane
![Load-bearing tower d3]()
![Load-bearing tower d3]()
- the built-in stop-ring of the d3 coupler prevents slippage into frame and permits quickly setting up in the upright
Simple and fast repositioning
- no dismantling required for repositioning
- repositioned by crane, forklift truck etc.
- manual repositioning with attachable wheelsets
![Load-bearing tower d3]()
![Load-bearing tower d3]()
Areas of use
The Load-bearing tower d3 is ideal:
- as falsework for bridge-building and tunnelling, where high loads are generated and high structural integrity is essential
- in industrial and power-station construction, as a load-bearing tower for any application
- as well as in building construction, e.g. for multi-storey car-park decks, schools, hospitals and shopping centres and where large-area tableform units reduce forming times
