Manuals, Documents & Videos

Doka panel struts and plumbing struts windproof the formwork and make it easier to plumb and align. The modular combination of plumbing struts, prop heads and prop shoes makes for optimum usability with Doka formwork systems.

Multi-trip packaging items such as containers, stacking pallets and skeleton transport boxes keep everything neat and tidy on the site, minimise the time wasted searching for parts and streamline the storage and transport of system components, small items and accessories. The stacking pallets simplify the storage and handling of floor props, folding tripods, formwork beams and sheets. The skeleton transport box is the tidy way of storing and handling lighter accessories (max. load 700 kg). For heavier accessories, there is plenty of space for these in the Multi-trip transport box (max. load 1500 kg).

Doka multi-ply formwork sheets are used in very many Doka formwork systems. The broad spectrum – ranging from DokaPly to the Xlife sheet – allows Doka to offer ideal solutions for many different requirements and cater for anything from infill zones to fair-faced concrete.

Dependable form-ties and safe suspension points are crucial for efficient and safe usage of any formwork. For both wall formwork, single-sided formwork and climbing formwork, a complete range of field-proven form-tie solutions and suspension points is available.

Doka floor props are the right choice for every usage situation, and a sturdy 'support' in the rough-and-tumble of everyday work on the site. The anti-handtrap and anti-dropout safeguard, forged nut, galvanised finish and ergonomically shaped fastening clamp are just a few of the features of these premium tubular steel props that have convinced customers all over the world.

Doka-Dreischichtplatten bieten ein hervorragendes Preis-Leistungs-Verhältnis bei besonders konstanter Produktqualität.

Exactly round columns, in superlative fair-faced concrete quality, can be achieved using Column formwork RS.

Frami Xlife universal panels are ideal for forming column cross-sections by hand or by crane.

Universal panels from the Framax Xlife framed-formwork range are ideal for forming varied cross-sections of column in a 5 cm grid – without needing a dedicated column formwork system on the site.

Circular formwork H20 is a practical circular formwork system that delivers smooth, curved walls from radii of 3.50 m upward – steplessly.

'Supporting construction frames' enable the concreting forces to be safely transferred by way of diagonal anchors in cases where it is not possible to tie wall-formwork elements through the concrete.

Large-area formwork Top 50 is a 'construction kit' large-area formwork system that is pre-assembled on a project-specific basis and is designed to accomplish many very diverse types of task. The shape, size, tie-hole pattern and form-facing of the elements can be adapted to suit any requirement.

Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency.

Dokaflex 1-2-4 is the fast, versatile floor-slab formwork for any desired layout. The quantities are computed very simply, using the slide-rule, with no need for formwork planning. Meeting individual requirements regarding the concrete finish is no problem, as any type of form-facing can be chosen.

Dokaflex tables are easy and practical to set up and can be shifted and adapted very quickly. This makes them a cost-effective and efficient way of carrying out large-area slab projects. Dokaflex tables can of course be combined with Dokamatic tables.

The shaft platform plus shaft formwork are quick and easy to reposition, in just one crane cycle.

The Platform SCP has room for all the site equipment needed, and is enclosed on all sides for safe, weather-shielded working, even at great heights. Powerful hydraulic cylinders cranelessly raise the platform, formwork, equipment containers and concrete placing boom to the next casting section, in only one lift.

The Guided climbing formwork Xclimb 60 is a system that is guided on vertical profiles fixed to the structure, even during repositioning. The entire climbing unit is safely and easily repositioned in a single crane cycle, even during high winds.

Dam formwork is used for forming one-sided construction projects, such as dams, barrages, river power stations or pylons without formwork ties. The climbing tower will transfer all pouring loads into the previous pouring section. Different system variants D15, D22 and D35 facilitate economic adaptation to various project-specific block dimensions.

This cooling-tower formwork is a fully mechanised, self-climbing large-area formwork system. It maximises rationalisation and minimises manual labour – after a short familiarisation period, the crew will soon be accomplishing the casting sections in a 1-day cycle.

The climbing formwork system for structures that need the formwork elements to be moved up in several casting sections. With only two accessories, the Folding platform K can be turned into a fully functional crane-jumped formwork directly on the site.

Climbing formwork 150F is a tried-and-tested system for crane-lifted climbing projects. It is simply to set up and easy to use.

Automatic climbing formwork Xclimb 60 is a hydraulically climbed system that can also be quickly raised by crane if sufficient craneage is available. Because it is guided on the structure at all times, the system can still be climbed even in windy conditions.

The Load-bearing tower DokaShore is used for supporting e.g. bridge superstructures made of pre-cast concrete members or CIP concrete, turbine platforms and wide-spanned drive-through access openings, cost-effectively and safely.

The Load-bearing tower Staxo 40 system stands out for being exceptionally easy to handle, and superbly adaptable to any building-construction project.

The modularly designed Doka heavy-duty supporting system SL-1 provides complete formwork solutions for widely differing tunnel cross-sections, regardless of shape and load.

The modular Tunnel system DokaCC is used in cut-and-cover construction method to form rectangular or round tunnel cross-sections quickly and with fewer materials. The applicability on all common types of foundations provides additional benefit in terms of efficiency.

Combined with a pre-assembled parapet formwork that can be cycled without being dismantled, the travelling Forming wagon T is designed for high cost efficiency.

The Doka cantilever forming traveller provides certainty regarding planning and costs while ensuring an optimum construction workflow. The perfect design match between the CFT's shoring structure and the formwork, its high standard of safety and its optimised workplace-ergonomic design together ensure that work can progress swiftly and safely.

Doka bridge formwork ParaTop turns Large-area formwork Top 50 into a cantilever arm formwork that can be operated completely from above. The system's innovative insert-shoe makes it easy to erect, and compensates for any installation inaccuracy.

Bridge edge beam formwork T is made up of a very small number of different parts. Its high load-bearing capacity and low dead weight make it a convincing solution.

The sturdy, stable stair tower can be put together very quickly from frames and pre-assembled stairway elements. Intermediate exits permit safe access to all work-deck levels.

The Pro­tection screen Xclimb 60 lets you carry out construction work in the top building-levels of high-rise projects in great safety, and protected from the weather. Pro­tection screen Xclimb 60 is a hydraulically climbed system that can also be quickly repositioned by crane if sufficient craneage is available. Because it is structure-guided at all times, it can be operated even in windy conditions. The system comes in several versions, giving you the ideal solution for every requirement.

System-based ladderways with integral ladder cages can be attached to Doka wall and column formwork in a few simple steps. These safety accessories can be mounted to the formwork while this is still placed flat on the ground. This ensures complete safety, right from the word "go".

These tried-and-tested systems give your site crew optimum pro­tection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success.

Doka folding platforms K are pre-assembled, work-ready scaffold platforms with standardised system components for all usage situations.

Load-bearing tow­er d3 scores for its high load ca­pac­i­ty, set-up speed and its broad spec­trum of ap­pli­ca­tion such as bridge-build­ing, high­rise and in­dus­trial con­struc­tion.

Doka's loading platform stands out for its load capacity, easy and safe handling, as well as the possibility to adjust the canitlever.

Doka's Safety Net Fans are pre-assembled units which can be used on any structure and adapted to any shape. Different sizes are available to perfectly adapt the system to your requirements and applications.

This system is the universal safety solution for all adge protection needs and stands for its quick and easy assembly.

Doka UniKit - the universal engineering kit for heavy loads in the infrastructure sector. Whether for bridge, tunnel or power plant construction - with modular standard components, we offer cost-effective shoring solutions. Together with Doka formwork equipment, interface-free infrastructure projects are realized. On request, with the right Doka services tailored to your needs. Get your modular system - plug & play!

Ringlock is a modular access scaffolding system for industrial and construction applications.

With the supporting construction frame Universal, even high one-sided walls can be produced in one casting – for wall heights up to 12.80 m.

The Supporting construction frame Variable is a safe and simple solution for single sided wall formwork by combining standard multi-purpose walings with add-on components - for wall heights up to 4.05 m.

The Tunnel system DokaMT is modular in design, offering an adaptable formwork solution for the typical cross-sections of mined tunnels. The variable-radius steel panels enable easy adaptation to different cross-sections.